In this article, we explain how to add a logo to your brand kit and then apply that logo to a collection of images in Batch Mode. It's a quick and convenient way to add logos to multiple product images at once.
In the image below, a template with a logo and replaceable subject (far left) is applied to three photos. This creates 3 images that use the logo from the template, with different product photos used instead of the replaceable subject in the template.
Preparation!
Before you get started, make sure you have your logo available as an image file. If you don't have a logo file, you could use Photoroom's AI Logo tool to make one (see Create an AI image).
When you have a logo, follow the instructions in the relevant section below.
On iPhone and iPad
On iOS, there are two convenient ways to add a logo to many designs in Batch Mode:
Add your logo to your brand kit and then use Apply to all to add it to a batch of images (described below).
Create a template that contains the logo and apply the template to a batch of images. For instructions on using a template with a batch, see Apply a template to multilple images in Batch Mode.
(Video shows Photoroom on iPhone)
Select Content.
Select the workspace you want to work in.
Select Brand.
Select the plus icon + in the Logos section and upload your logo image file.
Select Batch.
Select Start Batch.
Select the images that you want to upload and then select Add. These images are your batch.
Select the last image in your batch to open it in the editor.
Select Insert.
Select your logo from the Brand section.
Use gestures to resize and reposition the logo.
Select Done.
Select Apply to all to add the logo to every image in your batch. It will be in the same position and shown at the same size in all images.
Note: If you want to have the logo in different places, start again and create the same batch. Then edit the first image, insert the logo, and select Next. Insert the logo on the next image and select Next. Repeat until you have added the logo on all images in the batch and then select Done. When prompted, do not select Apply to all. Instead, wait for the timer to run down and the Apply to all option to disappear.
Select Export n images (where n is the number of images in your batch).
Use the settings to save to your device's camera roll or a folder. You can also select Share image to share your image files via another app, such as WhatsApp or your mail app.
Select Done.
On Android
On Android, you can create a template that contains the logo and then apply that template to a batch of images:
To make it easier to follow, we'll break the instructions down into separate sections.
Part 1: Create a template
Select Content.
Select the workspace you want to work in.
Select Brand.
Select the plus icon + in the Logos section and upload your logo image file.
Select the back arrow to return to your workspace.
Select New design and upload an image file.
Choose a template for the design, such as the white template.
Select Insert.
Select your logo from the Logos section.
Use gestures to resize and reposition the logo layer.
Select the back arrow to save your design and exit the editor.
Select the back arrow again.
Select Content.
Select the dotted menu ( ... ) for your new design and then select Turn into Template.
Part 2: Edit the template
Select your Templates folder.
Select your new template and then select Edit the original template.
Select the layer for the main subject of your image (typically, a product photo).
Turn on Replaceable subject in the layer settings.
Select Done.
Select the back arrow to return to your templates.
Part 3: Apply the template to multiple images
Select your new template.
Select Apply to multiple images.
Select the images that you want to include in your batch.
Select Add images to confirm.
Photoroom applies your template to your images. The logo will be in the same position as it is in your template.
Note: If you need to reposition anything in an image, select it and then use the editor to make changes. Select Next to move on to the next image until you reach the last image, where you can select Done.
Select Export to download your images. You can also Share your images via another app, such as Whatsapp or your mail app.
On Web App
On the Web App, you can create a template that contains the logo and then apply that template to a batch of images:
To make it easier to follow, we'll break the instructions down into separate sections.
Part 1: Create a template
Log in at app.photoroom.com.
Select the workspace you want to work in.
Select Brand kit.
Select Add in the Logos section and upload your logo file.
Tip: You can also use Create logo with AI to use Photoroom's AI to make a logo.
Select Designs.
Either:
Select an existing design to open it in the editor. You will turn this design into a template.
Select Create new and upload an image to create a new design that you will turn into a template.
Drag your logo from the Brand Kit sidebar on to your design.
Note: If you don't see the Brand Kit sidebar, you can display it by selecting the Brand Kit option at the top.
Resize and reposition the logo layer.
Select Home to save your design and exit the editor.
Select the dotted menu ( ... ) for your new design and then select Turn into Template.
Give the template a suitable name and select Create template.
Photoroom turns your design into a template and displays your Templates folder.
Part 2: Edit the template
Position the cursor over your new template (in the Templates folder).
Select Edit template.
Select the layer for the main subject of your image (typically, a product photo).
Turn on Replaceable subject in the layer settings.
Select Home to save your template.
Part 3: Apply the template to multiple images
Position the cursor over your new template.
Select Use in batch.
Select the images that you want to include in your batch.
Photoroom applies your template to your images. The logo will be in the same position as it is in your template.[Optional] Use Size to change the size and shape of your designs. Photoroom will reposition the layers on the designs to suit the size you choose.
[Optional] Use Position to reposition the main subject of each design in the batch.
Choose from:
Original to position the subject how it was captured
Centered to position the subject in the center of the design. Use the Padding slider to change the amount of space around the subject.
Template to position the subject to the recommended position for the template.
[Optional] Use Background to change the background layer. You can choose a suggested AI background, create your own AI background from a prompt, or choose a color.
[Optional] Use Shadow to apply AI shadow effects to the main subject in each design.
Select Download your images to download the image files in your browser.
Select Home to exit the batch editing screen.